Pioneering Infrared Imaging Technology Solutions

Phone: (937) 431-8041
Fax: (937) 429-3558

PanthIR II Infrared Camera

Handheld Night Vision Camera Design

Spirit's PanthIR II™ handheld camera provides night vision capability for civilian, and paramilitary surveillance, detection and protection applications.This handheld thermal camera can be used for rescue forces, law enforcement, and night-time perimeter surveillance of sensitive sites and areas such as national borders, pipelines, oil terminals, power stations, communication transmitters and prisons. It enables the user to detect a person at a distance of 300 meters and a vehicle at a distance of 900 meters.

The PanthIR II™ Infrared Thermal Sensor can also detect overheating and fires before flames and smoke are visible, which makes it the perfect Infrared camera for firefighters offsite observation.This makes it a highly cost-effective device for early-warning and/or predictive maintenance in power stations and in industrial process control.


Camera Features

Description / Performance

Detector Type

Microbolometer

Array Format

320x240 (Model UC320D)
320x240 (NTSC), 384x288 (PAL) (Model UC320U)

Detector Substrate

VOx (Model UC320D)
aSi (Model UC320U)

Pixel Size

51x51 microns (Model UC320D)
35x35 microns (Model UC320U)

Spectral Range

8 - 14 microns

Dynamic Range

> 1000:1 Typical

Operability

> 99.5% (Model UC320D)
> 99.9% (Model UC320U)

FPA Operating Temperature

25 °C

NEdT (camera level)

< 50mK (with f1.0 optics)


Packaging / Cooler

Description / Performance

Cooler Type

Thermoelectric Cooler (TEC) Temperature Stabilizer

TEC Stabilization Time

< 60 seconds

Package Type

Hermetically Sealed Vacuuum Package

Package Window

AR Coated


Camera

Description / Performance

Analog Video

NTSC or PAL (factory set)

FPA Frame Rate

59.94 frames/sec NTSC, 50 frames/sec PAL

Digital Video

14 – Bit (uncorrected, corrected, pixel replaced);
16 – Bit (post transform)

Non-Uniformity Correction Tables

Up to 4 available

Video A/D Resolution

14 Bits

Calibration Flag

Ambient and Elevated Temp,
Automated / Periodic One Point Refresh

External Timing

External Sync and External Clock

Remote Control

RS232, RS422 full duplex or RS485 half duplex (factory set)

Input Power

+6 to +16 VDC, +16 to +25 VDC, or +25 to + 28 VDC
(range factory set)

Power Consumption

USB

Standard Optics

<4 W Steady State (2.75 W typical @ 25°C amb),
<12 W at Startup (1 min)


Enclosure Specifications

Description / Performance

Dimensions

3.00 in H x 3.00 in W x 5.25 in L minimal
(w/o manual focus lens)

Weight

2.5 lbs minimal (w/o lens)

Operating Temperature

-30 to 70 °C

Storage Temperature

-40 to 85°C (UC320D); -40 to 70°C (UC320U)

Water Resistance

NEMA 4

Vibration

4.2Grms, all three axes

Relative Humidity

10 to 95% non-condensing


Export Restrictions

SSI products may be subject to Export restrictions administered by the US Departments of Commerce & State. Please contact the US Department of Commerce or State for assistance. Spirit Solutions, Inc sells SSI’s products for legal use only. It is the sole responsibility of the purchaser to determine local, state, and federal regulations prior to purchase. SSI will not be held responsible for any illegal use of it's products. We reserve the right to refuse shipment to any person for any reason.

Specifications are subject to change without notice.

 


© 2007 Spirit Solutions, Inc.
Site created by Spirit Solutions, Inc Web Development Team
Questions or suggestions about this site can be sent to webmaster@spiritsolutions.us
Site contents Copyright 2002, 2003, 2005, 2006 by Spirit Solutions, Inc.. All Rights Reserved